@MrChuckles You can re-use your network name :) Just make sure the encryption matches what the Starlink router uses...probably WPA2-AES. If the encryption doesn't match the devices will see it as a...

@MannyF I don't know that it's broken, and other than generating spurious logs, is there a material impact on the operation? Does it really go offline for 2hrs?? My guess is your garage hub has weak...

@Macattack You need at least 1 EAP225-outdoor connected to ethernet if you want to adopt another one remotely via Mesh. You can also adopt an EAP225 while ethernet connected and then deploy it to the...

@mackworth 1. Revert to working controller 2. Default the problematic AP via controller i/f to device 3. Forget the AP from both OC200 and Linux controller instances 4. Adopt defaulted AP fresh into...

@aacuanico The unit will report its SN via its web management interface when managed...bit ironic. Apparently the standalone GUI for the AP does not, i just checked the emulator here:...

@RemcoCopp A wired unit reporting as 'isolated' usually means its heartbeat is no longer reaching the controller...and this is the direct result of loss of communication, which can be ethernet, or...