@Daycoder What firmware version are you running on the 225's? Also, did you enable the Advanced Features or not? There are a number of earlier threads where TPlink APs have had issues with IOS/OSX...

@Unwaf I do not believe you can 'restore' a single router config from Device A (previously managed by Controller) to Device B (new) when managed under SDN (which seems very odd to me). However, the...

I saw your note about 15 APs, and one of them refusing to join as a wired AP. The problem is most likely cabling (again) or failing that the backend VLAN/routing. You should verify that it is...

@Super-WiFi It can only be 1 of 3 things: 1. POE (but you said this is oem, so not) 2. Cable either POE-AP or POE-switch 3. Noisy AC power source

@TLinkers_0 If the one user to be blocked isn't a smart or motivated user (ie NOT a teenager), then you could simply break outbound traffic by manually forcing a non-existent default gateway IP via...

@jst-2405 At a minimum you want 2 wired units, even if that means you have 5 APS... two wired at the same location, and 3 remotes that are wirelessly meshed. You may also wish to leverage a dual...