@EIBROG Just a suggestion if you are still hunting around for more data points. You could replace the site-site with a client-site connection and also run the tunnel encrypted or not. You say you...

@quockoi I think that's just your AP's 802.11n technology limiting you. Try googling 'real world 802.11n throughput'...most sites state about 25-35Mpbs of actual TCP throughput. If you want to go...

@treas I wouldn't have believe it, but ok, firmware it is! Hopefully they issue a BUG ticket for you and get this resolved. FWIW I just had my SG2008P beta firmware delivered last night, took about 2...

@ingeborgdot Seems obvious that you have a loss of comms between the Office and Control rooms, this would cause the symptoms you are seeing. I think there are 3 ways that this could happen, 1. power...

@ingeborgdot I agree with your app, only Ch11 is likely to perform well at 2.4. For 5.8, I would recommend 149+

Yes, 20Mhz for the 2.4G radio, you only have 3 non-interfering channels, 1, 6 and 11. 20Mhz is good for almost 90Mbps which is enough for any normal single use application I can think of...and leads...