@ingeborgdot Not familiar with your Insteon gateway...but I know what Insteon is...I'm an old X10 hack :) Part of the hate I have for static IP's is that I used to change ISPs every few years, or...

@ingeborgdot You don't want to statically assign IPs to devices that your router thinks it can hand out to other dynamic IP clients. I typically use .1 for the router, assign any required statics .2...

@ingeborgdot All of this is personal preference, however, some things are just easier. For instance, how much fun is it going to be to access each camera's UI, change the IP and lose connectivity...

@ingeborgdot If you are going to re-IP your cameras...then I suggest you just leave them as DHCP and create a Fixed IP mapping in the Omada controller. Same effect, but makes changing your network...

@ingeborgdot by default, all your LAN subnets can talk to each other. You need to add profiles and configure ACLs on your switch to actually prevent them from doing so. This is a fantastic and easy...

As above, but noting the nuance in your design which was: 5G LTE-> Router-> Omada Switch->generic TPlink switch->APs I would recommend the following, which includes removing the generic Router and...