@Amds You will need a managed Omada router (ER605 most likely for you) before you can manage multiple SSIDs/VLANs to work in conjunction with the OC200 and the APs (or monitor the gateway to internet...

@Super-WiFi On right side of the EAP225 there should be a green LED status bar. Is yours on and is it solid, flashing, yellow? Did you log into each AP and configure them? How many of the APs are...

@KevinL1991 Are you using a controller? If so what version is the controller, the version of the old 110 and what version is the 110 ceiling? I suspect you have mismatch (ie v4 or lower for the...

@wondering You have a relatively small network and your APs should be DHCP configured anyways by the OC200. Should be a simple matter to reconfigure the IP of the printer if it's static. My...

@decee And how are you powering this remote AP and what model is it? You need a POE and possibly POE+ injector at one end of your 200' cable to make that AP light up. If you'd had a v1 Starlink...

@Skora I don't think your v5.x AP firmware plays nicely with v2.x controller software (they changed the omada ports and some of the autoconfig dance in going to v5). If you cannot downgrade your AP,...