@Tex_2022 What subnet mask do you use? Is it 255.255.255.0 (/24) for all interfaces?

@AusDread "why can't I have vLAN 10 traffic go to the TL-SX3016F on the same 'trunk' as the vLAN100 traffic when TAGGED on that Port (like every other switch does)" I wonder how you have tested that....

@AusDread “Attempt 1: Wiped vLAN 10 Interface and the vLAN Wiped vLAN 100 Interface and the vLAN Set vLAN1 with the IP 10.0.100.20 No ping from anywhere (my laptop on vLAN 100, and a Server on...

@Liuck1975 Is your ISP one of those that use Carrier-grade NAT by any chance?

@AusDread TL-SX3016F 1. UNTAG the port in the "native" VLAN and set its PVID to the VID of that VLAN. 2. TAG the port in the remaining VLANs. 3. Restart the switch just in case. That's all you need...

@Liuck1975 "At the moment, even if I put my server's private ip in the DMZ," What exactly does that mean? The Virtual Server function of ER7206 works fine for port forwarding. I don't think you would...