@janaca Reboot everything... Router, switch, and Aps... and see if it picks up an IP. BY chance is the power light on the AP? Are you powering by the SWITCH or POE Injector?

@janaca The Router is adopted, right? Log into the controller and look at the client list and if you see APs MACs in the list? Have you confirm the DHCP scope is wide enough? set it to .50-.254

@janaca Is it a flat network? No VLANs? The OC on the same LAN as the APs? Also is the OC200 on the newest firmware version?

@janaca When adding the wireless / MESH APs... is there enough signal from the MAIN AP in the location you want the APs? Download Acryclic Wireless Analyzer on your laptop and go out to that location...

@Caniko You can manually rig it... but it wont be perfect. Like Virgo said, the Fast Roaming Protocol will not work between the router and the APs themselves. But you can configure the same SSID for...

@Phil80 If your VLAN are not isolated... you can log into the device (APs or switches, whatever) GUI and set the inform the link back to the controller. OC controller doesnt see devices across vlans....