Forums/
Routers
2023-01-15 09:43:48
@GRL the firmware van you download here: https://www.tp-link.com/us/support/download/er605/#Firmware
0HELPFULS
Forums/
Routers
2023-01-15 09:06:27
@modebm after upgrading my network works fine, but the loop occurs. I do not use VLAN's. The IP range is not the default range. The controller is a container in Docker on my Synology NAS, version...
0HELPFULS
Forums/
Routers
2023-01-14 22:26:14
@shberge strange that some people have no problems. After the factory reset I did a downgrade, set the right range for DHCP back (IP router 192.168.2.254 / DHCP range 192.168.2.1-192.168.2.250) and I...
0HELPFULS
Forums/
Routers
2023-01-14 20:06:40
@Xammo I fixed it to go to the gateway (IP of the router), login en reset to factory settings. After te reset, refresh IP of the client (when you have an different IP-range than default) and go to...
2HELPFULS
Forums/
Routers
2023-01-14 19:27:01
@Xammo The firmware can you download from here: https://www.tp-link.com/us/support/download/er605/. You can select the hardware version and the previous firmware
0HELPFULS
Forums/
Controllers
2023-01-14 15:56:04
Re:Router ER605 reconfiguring/provisioning every 4 minutes after upgrade OC200 from v5.3.2 to v5.4.7
@Gfroza More people have the same problem: here and here are two topics
0HELPFULS