[Setup] ER707-M2 gateway connected to my ISP (gigabit fiber). SG3218XP-M2 main network switch Couple EAP772 wifi access-points (powered via PoE ports on the switch) All centrally managed via an Omada

This Article Applies to ER707-M2(UN) v1.0 ER707-M2(UN) v1.60 ER707-M2(UN) v1.20 ER707-M2(UN) v1.26 ER707-M2(UN) v1.30 ER707-M2(UN) v1.36 Version Info: Firmware Version: 1.4.0 Build 20260203 Rel.81971

Background: This post provides a configuration guide on configuring the local DNS server in standalone mode. This Article Applies to: Omada routers with LAN DNS capability. Configuration Steps: 1. Log

This Article Applies to ER707-M2 V1 Release Notes Version Info: Adapted Model: ER707-M2 V1 Fully Adapted Controller Version: SDNC 5.15.20.X - Omada SDN Controller_V5.15.20.7 Pre-Release Firmware Windo

Request / Issue is same as you can find in ER605 post.

This was reported on my repo for the container image I build. This is happening for both the beta and GA versions of 5.14.x: both of the latest beta versions, 5.14.0.11 and 5.14.20.9 and the 5.14.26.1