@Clive_A 

Hi,

Just upgraded via controller - the update worked fine. 

We will see how it will operate now :)

Cheers

RR

  @Clive_A 

After the upgrade the CPU usage is at 0%... I'm not sure if the devs optimalized the CPU usage so well that it's nearly not used at all or the graph is not working properly?

I did a reboot of ER707 just in case, but it changed nothing. See the graph below:

Cheers

RR

  @RaRu My graph says also 0% CPU usage. Same problem after upgrade with the beta firmware

  @RaRu 

After some time it does show the CPU usage over 0% but those are just small peaks, like 1-2%. 

Has anyone tested IPS/IDS with the new firmware? I turned it on and it seems like the speed is significantly better than before. I also tested curl -A "BlackSun" www example com and it was blocked so IPS works.

  @MR.S 

I can confirm that the speeds now are way better. With my 1/1Gbps link I can't feel any speed difference wit or without IPS/IDS:

Nice.

  @RaRu 

yes it is a significant improvement but not mentioned in the release notes.

  @Clive_A 

"I have an OC200 2.0
Firmware Version
2.20.5 Build 20250326 Rel.42983

I just updated the ER707-M2 v1.0 router to Firmware Version 1.3.0 Build 20250428 Rel.74712

WOL is still not working."

Clive_A wrote

This Article Applies to

 

ER707-M2 V1

 

Release Notes

 

Version Info:

 

Adapted Model: ER707-M2 V1
Fully Adapted Controller Version: SDNC 5.15.20.X - Omada SDN Controller_V5.15.20.7 Pre-Release Firmware Windows
Minimum Firmware Version for Update: 1.2.2 Build 20240324 and above.

 

New Features:

1. Add support to SD-WAN.
2. Add support to Content Filter.
3. Add support to Virtual WAN.
4. Add support to Disable NAT.
5. Add support to Google LDAP.
6. Add support to LAN DNS.
7. Add support to FQDN/wildcards in ACL.
8. Add support to WAN DHCP Option.

 

Enhancement:

 

1. OpenVPN/Wireguard VPN: add support connecting to remote server/peer via domain name.
2. Optimized CPU utilization.
3. Optimized the time to enable the backup link.
4. Optimized booting time.
5. Optimized the time to dial up the WAN link.
6. Optimized the time to upgrade FW.
7. Optimized the time to generate an OpenVPN profile.

 

Bug Fixed:

 

1. Fixed the HTTPS redirection exception in standalone.
2. Fixed the static route for L2TP VPN doesn't take effect after re-enabling L2TP VPN.
3. Fixed the WOL exception when dropping some unknown unicast packets.
4. Fixed the issue that the manual ISP profile for USB modem cannot be saved
5. Fixed the issue that the PPTP VPN would disconnect  occasionally

 

Firmware Download

 

Before the Upgrade

(1) Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Gateways

 

Firmware Download Link

ER707-M2(UN)_V1_1.3.0_Build20250428

Notes:

(1) The above firmware applies to the described models.

(2) Your device’s configuration won’t be lost after upgrading.

(3) If you have disabled the HTTPS port, please enable the HTTPS port before upgrading the firmware.

 

Additional Information

 

All feedback is welcome, including letting us know about successful device upgrades.

If somehow you encounter an issue during or after the router upgrade, it's suggested to contact us with the following info:

• Omada Controller version 
• Device Firmware version with Build number (previous and current)

 

If your router gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.

How to use the Emergency Mode to recover the firmware for Omada Gateways

 

Update Log

 

Arp 29th, 2025:

Release of this post.

 

Recommended Threads

 

Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada Router Related Issues [Actively Updated, Post for Subscription]

 

  @Dav91221 

WOL has nothing to do with the firmware. There is no change regarding or related to that.

WOL is unicast and you should check if the packet is successfully sent to the device. Or check the device which sends the magic packet.

  @Clive_A since the latest upgrade of the ER707-M2 I have a strange issue. It happened last week and yesterday it happened again.
As I am using two internet lines, one via RJ45 (backup) and one via SFP (primary), therefor it took some time before I noticed the primary stopped working.

At first I thought there was a problem with the connection, but after contact with the provider we came to the conclusion there was no outage on the fiber channel. It just went offline.

Troubleshooting steps last week:

reboot router (ER707=M2 v1 1.3.0) --> no luck

reboot controller (OC200 V1 v1.35.7) --> no luck

Power cycle ER707-M2 --> SFP connection back online.

This was done last week. Yesterday, I was facing the same issue. tried the same steps and but before power cycling the router I made a screenshot of my WAN settings and there I noticed something strange, there was no <CONNECT> button visible in my WAN settings. See below:

Backup Connection:

Primary connection which fails:

I have no idea what triggered the issue. And the current workaround is power cycling the router.