@Joseph-TP Thanks, But I forgot to update here, The subnet was reachable actually. I did a trace route to find it was reaching the MR600 but nothing after that. Then I did a nmap scan and i found out...

I have a TP-Link XC220-G3v XPON router as my main router on which there are devices attached, two of them are my NAS and my MR600 router (which I'm using if I am to lose my main internet, its running...

@Marvin_S Band 3 and Band 8 works fine on their own. Band 8 gives slightly better speed. Few days ago the router would switch between 8,3 and 3. and if it showed a stable 4G+ on the router then it...

Hi, My Router loses WAN IP after it connects to these two band (8,3) and unfortunately these are the only bands available for me to use. My router is running latest firmware. I have also attached...

@Om4r Only downside is that sometimes the router shows as offline in the Tether app. Rarely.

@Om4r https://static.tp-link.com/upload/firmware/2022/202212/20221205/Archer_MR600(EU)_V2_220105.zip This one is 1.6.0, This one was pulled from the Firmware listing page but still is available on...