@deeo Thanks for your thorough explanation. I made some trials, also using a different client, and it seems I might be getting somewhere. I believe my iOS client has some issues for some reason, my...

Hello Deeo; thanks for your input. Let me see if I understand correctly - I have to create an additional “fake” peer, no client associated with it, and both the interface and the peer need to live on...

Hello Tedd, thanks for your input. With this setup I have the same - internet access but no LAN access. Using a public DNS works better only because I cannot access my local DNS normally, but...

@Tedd404 ER605 LAN = 10.0.0.1/16 ER605 [Interface] PrivateKey = 123 Address = 192.168.0.2 DNS = this setting is not part of the interface on the ER [Peer] PublicKey = ABC AllowedIPs = 10.101.0.2/32...

Hello Tedd, I will be able to make the screenshots later today - I did not create any routing rule as I assumed that the Wireguard "plugin" would perform that by itself, I believe it is not mentioned...

@Tedd404 Hello Tedd, thanks for your help. 1. it is not strictly necessary to put the ER605 behind a NAT. I get ADSL service, so I need a modem, I cannot use the ER directly. In the modem, the ER605...