@Clive_A thanks again and good news: Good suggestion (to remove/ rule out EAP). So I wired Ikea Hub directly in LAN port 9, followed the same steps as mentioned above. First results, no succes/ the...

@Clive_A thanks for your reply, much appreciated. I noticed you tested a different scenario: you reserved the IP within the main/ same "LAN" as the router is operating in. That works also here. Also...

@Clive_A no it isn't resolved. In this case it isn't possible to reserve the ip in the IoT device itself. I notice that when you connect wired, the ports on the router are actually "unmanaged". Via...

@Clive_A same result :( steps i followed: 1. remove DHCP reservation 2. power off Ikea Hub (IoT device) 3. reboot router/ network 4. add DHCP reservation 5. power on Ikea Hub result: As you can see,...

@Clive_A thanks for the quick reply. This device is still getting IP address from "LAN" lan instead of "IoT" lan. These are the steps I followed: 1. Gave the IoT device fixed ip address within "IoT"...

This IoT device is wired via TP-link EAP615 wall, directly connected with ER7212PC. Result: IP address within LAN (Vlan 1) instead of IoT network (Vlan4). Any advice?