This problem only occurs on LAN 1 port, the other 3 are all OK? Besides, give a try on factory reset: press its reset button for 15s while the router is turned on. Do this several times. Then see if...

Both the power and sys are solid on? How about the wlan, flashing or what? give a try on factory reset the router by pressing its reset button for 15s while the router is turned on. You may do this...

give a try as follows: 1. disable WMM on TL-WR740N; 2. disable WPS/QSS; 3. set the uncrowded wireless channel and change the channel width to 20Mhz.

Anyway, to anyone who have the same problem, when you can not login the router's web page, don't forget to reset the router to factory defaults by pressing its reset button several times and then try...

As you can ping 10.0.0.1 on the repeater, the suggests the connection between the W8968 and WR702N is OK. When connect your device to the repeater by cable, are you able to automatically obtain an...

As far as i know, there are two operation modes, AP client router and AP router, on the WR743ND. How comes repeater mode? I suspect you gave the wrong model number. Is it TL-WR702N or sth else? In AP...