Before you login to its web interface, you need to configure a static IP address on your PC. That's right. But i don't understand "after you click on change adapter settings, all you get is a blank...

@notorious from the arp-a, it seems your TV is able to obtain IP address automatically through the WR702N working in client mode, it could be the DNS problem, have you tried the public DNS 8.8.8.8 on...

[QUOTE=xpeca;11421] but with most current stock fw hitting router ping packet drops over 802.11 n roughly between 5-10%, even the router is located in the next room - signal strength ~ -55 dBm, no...

Do you use cable modem for Wight Fiber? I am not quite familiar with Wight Fiber. Is your TL-WR702N working in wireless router mode or the default AP mode?

Troubleshoot as follows: 1. on the router's page, go to system tools-> diagnostic, ping 8.8.8.8, a proper reply means internet is activated on the router. 2. then on PC, open windows command prompt,...

:( You'd better to email tplink technical support and confirm with them whether there is an firmware of this router which supports airprint.