Hi @aashishvanand , The web interface just says "ONVIF" which I assume is port 2020. The camera's had to be left on their original subnet which they had originally been installed on. The NVR had been...

Hi @aashishvanand , I had a very similar problem just over the weekend. My solution was to use only the NVR Web Interface, I used the "cameras/add manually" option and specified the IP address - it...

Thanks @Clive_A , Because they're C300HP's there's no Web Interface for the cameras. I found the answer in the end: The scenario: * NVR and Camera's were on old network segment * switched NVR and all...

Hi, I have a couple of C300HP cameras. I've recently changed the network configuration. One of the C300HP is working fine - the other one is not - it won't connect to the network properly. I've done...

Thanks @Clive_A ! That makes sense. Cheers! Regards, Bill

Thanks @Clive_A , I tried incognito mode - gets the same result. Althogh I realised that the Camera's TLS Certificate is invalid - expired last February year!!! Would that make a difference? Regards,...