oro70LV1Online
Following: 0Followers: 0
Forums/ Routers
2024-07-11 11:39:11
Re:ER707-M2 V1.0 Software 1.2.2 Deep Packet Inspection Throughput
This is my setup. You mentioned I test UDP traffic. That was standard with older iperf versions. Since v3 it measures TCP traffic by standard. As you see now I have tested TCP and UDP and it mkaes it...
0HELPFULS
Forums/ Routers
2024-07-11 11:16:30
Re:ER707-M2 V1.0 Software 1.2.2 Deep Packet Inspection Throughput
@Clive_A
0HELPFULS
Forums/ Routers
2024-07-11 06:13:36
Re:ER707-M2 V1.0 Software 1.2.2 Deep Packet Inspection Throughput
@Clive_A Yes, when you calculate it together you are right. UDP ist matching the datasheet. But I have measuered it in 2 steps and not at the same time. Why it is so different between Up and...
0HELPFULS
Forums/ Routers
2024-07-10 06:27:46
Re:ER707-M2 V1.0 Software 1.2.2 Deep Packet Inspection Throughput
@Clive_A Hi, Thanks for your answer. 1. No IDS is off. I'm aware of the decrease. 2. Yes, I have tested intervlan routing. Only LAN Traffic between 2 Hosts. This traffic seems to be affected by DPI...
0HELPFULS
Forums/ Routers
2024-07-09 12:35:48
Re:Missing Feature ER707-M2 Jumbo Frames
Hi @Clive_A I can't see the jumbo frame settings on LAN. I'm using the omada controller 5.13.30.8 on Docker. But for your info, I don't have a TP-Link Omada Switch connected. Could it be a reason why...
0HELPFULS
Forums/ Routers
2024-07-09 12:30:16
ER707-M2 V1.0 Software 1.2.2 Deep Packet Inspection Throughput
Hi, I have a setup with the ER707-M2 as router-on-a-stick. This means the routers routes between VLAN's via the interface 2.5G WAN/LAN2. When I run some iperf3 session between a host in vlan a and a...
0HELPFULS
12