@Chris2629 Please refer to the following guide to troubleshoot: How can I set up the AP + Client topology successfully? If it can't be fixed, please share the screenshots mentioned in the article, so...

Hi @frankz66 The error indicates you need one of these MongoDB versions: mongodb-server (version < 8.1.0) mongodb-10gen (version < 8.1.0) mongodb-org-server (version < 8.1.0) Please Install a...

@Wrzlbrnft Here is an example for point2 of GRL's suggestion:

Hi @Mt.Faith If the port is only used to connect an access point, I think it is fine to assign all VLAN IDs to the Tag Network and set the Native Network to 19 >>>Yes, this is fine. Below is a guide...

Hi @nurix Are you using SG2210P? What's the model number of the POE device plugged into the port? After deteleing the config, please unplug the cable from the port and plug it back and see if the...

@DrMile Here are the recommended installation configurations. As shown in the image above, you will need 2 pairs of CPE210 and 2 outdoor EAPs. If your camera is 2.4G, I recommend the EAP110-Outdoor,...