Hi @abmantel Is the other EAP650-outdoor the signal source of the problematic one? Is there any power outage? To identify if this is the EAP's hardware defect, you can test like this: Swap the...

Hi @PISD It's not supported.

Hi @ColJacks OC200v1 and v2 have the same features. To swap them, please follow the steps below: 1. make sure their firmware versions are the same; 2. backup the config file from v1 (Global...

Hi @McDProp Explanation of Isolated: (For APs in the mesh network only) The AP once managed by the controller via a wireless connection now cannot reach the gateway. If the mesh network is unstable,...

Hi @Defty connect all devices (including controller) then go straight to controller and initiate deployment? >>>Choose this. No need to configure devices separately, they will be wiped once been...

RickRick123 wrote I just factory reset both APs and re-adopted them. I then ran AI WLAN Optimization and I'll leave what it recommended. One is on chanel 36 and the other on 40 for 5ghz with 80mhz...