if only the power LED stays on and reset doesn’t respond even after holding for 10 seconds that usually means the firmware is corrupted and the device is stuck in boot stage it’s not something you...

since the spare MR6400 works fine with the same SIM, PSU and antenna it really points to the first unit having a hardware fault most likely the LTE/4G modem inside has failed which sadly isn’t...

unfortunately this looks like a hard brick. on the C8 v1 the normal signs of life would be power LED + LAN activity when you connect a cable, and the reset button should always give some response. if...

@Pro-gamer I saw your screenshots and yes you are testing with very high internet speeds. On firmware 1.2.1 you had around 3288/3164 Mbps and on 1.3.1 it shows about 2794/2631 Mbps. That is still...

I also have two RE700X (Hardware V2) and today I got the same notification in the Tether app. I even started the update remotely while I was away from home, and on both units the upgrade completed...

Using a Powerline model with pass-through socket (like TL-PA7017P) could be more convenient, because it allows you to plug the adapter directly into the wall and still keep a free outlet for other...