staples1347LV1Online
Following: 0Followers: 0
Forums/ Routers
2024-08-20 00:03:47
Re:ER706W-4G: Bug: Wireguard doesn't always initiate traffic at initial bootup
@staples1347 I just setup a client to server Wireguard vpn on Linux and can confirm with persistent keepalive set to 14 seconds , the wireguard "client" sends keepalive packets every 14 seconds even...
0HELPFULS
Forums/ Routers
2024-08-16 23:41:37
Re:ER706W-4G: Bug: Wireguard doesn't always initiate traffic at initial bootup
@MR.S At the moment the Peer endpoint is set to the public ip of the remote wireguard server, Allowed Address is set to 10.17.0.0/18 , and I have Persistent Keepalive set to 14. Also, I am running...
0HELPFULS
Forums/ Routers
2024-08-16 23:37:09
Re:ER706W-4G OpenVPN Client config very limited
@MR.S okay thanks
0HELPFULS
Forums/ Routers
2024-08-16 23:36:46
Re:ER706W-4G custom dns zone forwarding?
@MR.S oh it is actually a conditional forwarder that I'm wanting to setup as if you set the lan dns to a server that is going over a vpn, then internet access won't work if the vpn is offline.
0HELPFULS
Forums/ Routers
2024-08-16 06:27:09
ER706W-4G: Bug: Wireguard doesn't always initiate traffic at initial bootup
At initial bootup , the ER706W-4G doesn't always initiate outgoing traffic on the wireguard vpn interface until I manually go into the wireguard peer in the web ui and click disable and then enable....
0HELPFULS
Forums/ Routers
2024-08-16 05:53:04
ER706W-4G custom dns zone forwarding?
When setting up a vpn back to head office, it is common to setup forwarding of internal dns zones to the internal dns servers. For example, head office might have example.ad setup on dns servers:...
0HELPFULS
12