@AlokJain This issue cannot be fixed as this was caused due to some new LAN port allocations, making any TP-Link ONT with LAN ports unusuable over wired. Only the XX530v v2 and XZ000-G3 with a 22...

@SirDigbyChicken only option I see is openwrt, which offers granular control. But TP-Link should fix that for sure. Their IPv6 implementation has historically been trash

This should be a feature 100%. Many ISPs give /64, /56 or /48 Prefix, and TP-Link only supports /64, even the main IP is /64, when some ISPs delegate a /128 WAN IP

@Kevin_Z I think he is the ISP himself, he has both OLT and ONT, but internet is not accessible even under VLAN and "bridge" conditions. Maybe he needs a full-on guide

@Loxley As per my conduct, seems like it's the same. It can't handle "null" devices. And I checked the web ui via browser, it has lesser devices (accurate) than what the tether app shows. Could be a...

@Joseph-TP In the Web UI, it's accurate. In TP-Link Tether App, it retains the offline clients and doesn't accurately show the device list properly. I hope it's fixed on the app side, it creates a...