@UniFly I'm using TP-link OMADA controller. First of all, do you able to discover your new AP in the controller or you can use Advanced IP Scanner to check whether is discoverable within the current...

Hi @Vincent-TP , Thanks for your advise.I have 2 VLAN ( .0.X and 10.X ) and each with DHCP server. All my APs are connected under 10.X and last week I added one new AP ( TOOLING is 0.X ). After...

BTW, I do have one AP "TOOLING" in OMADA network but under 192.168.0.X network. Not sure whether this relate to why the client connected to "P1-PRODUCTION" AP but IP is from 192.168.0.X ?

My AP "P1-PRODUCTINO" is setup under 192.168.10.X network and notice some of my connected clients with 192.168.0.X network. Anything that I had miss configured? Connected clients

Ok.. my issue resolved. Root cause is I'm entering inappropriate admin password. Thought is my OMADA Control password but is default "admin" password.

Hi, I'm using Discovery Utility to add one new EAP245 but end up failed when adopting. Here refer following for error : 2024-11-20 18:21:46.520 INFO 46920 --- [netty-tcp-server-worker-11-8]...