I have 8 InSight S445ZI cameras connected to a VIGI NVR1008H-8MP NVR. For some reason 3 of them can successfully detect when a new firmware is available through System settings>system...

@Clive_A If I enable the "network isolation" function thereby putting the cameras on their own subnet, do you know what ports I need to specify in the address of the NVR so as to still have access to...

Clive_A wrote Give me an example with IP specified(in CIDR format). What is included and excluded? I failed to understand what you expect to do at the end of the day. @Clive_A As I said, I wish to...

@Clive_A I don't use VLAN's. I have everything on the 1 subnet. My point is I should be able to block using the /24 format. It is standard format and should be accepted in the firmware OS. As I said,...

How do I set a range of IP addresses to be blocked/allowed in "Network>IP Restriction" of the NVR? The IP Restriction section only seems to accept individual IP's? I tried standard IP range format...

@Clive_A They're all on the same subnet. E.g. camera on 192.168.1.221 and NVR on 192.168.1.200. Like I said, they are accessible when connected via a separate PoE switch. It's only when they are...