R1D2 wrote Do you indeed mean resetting or do they reboot? If they reboot, your cable might be faulty - too long for example (> 60m) or to much voltage drop (bad quality). Only explanation I have is...

R1D2 wrote Two bars on the LED display of CPE210 mean signal strength is below or equal to -80dBm, which is pretty bad. Such weak signals will give a signal-to-noise ratio of about 10 to 15dBm only...

R1D2 wrote Not clear to me what you mean with "both sides" and "opposite sites". If you indeed mean physical locations, make sure that the remote station is inside the 65° beam width of the CPE210...

Carat1 wrote Hi,Generally, for remote cameras systems, P2P link is suggested. One CPE210 (on Virgin hub side ) should be configured as AP and the other CPE210 (on camera side) should be configured as...

Model : Hardware Version : Firmware Version : ISP : Can't get these working, I can ping them both from the laptop on both sides when connected to it through the lan but I can't ping either from the...