I'm considering purchase of ER7206, but I do not know if it supports failover between two IPsec tunnels with different peer IPs on a single WAN. When experimenting with ER605 v2 I confirmed the...

I did receive a beta version of the ER605 2.3.3 Build 20260429 Rel.27086 firmware. The SIP communication over IPSec seems to be working correctly now.

@KBC_SEBA Yes, I received your message. Finally, today I was able to test the 2.3.1 ER605 in the same network, the issue was reported from. Both problems with SIP server connection and ping through...

I was unable to flash the ER605 with 2.3.1 firmware. I can get back just to the 2.3.2, only. Thank's to the Wireshark I was able to understand what is going on in this case. It appears, the router...

@Hank21 "May I ask the network topology" There are 3 subnets. ER605 does have 192.168.121.1 255.255.255.192 subnet. Following 2 subnets are located behind a Cisco RV320 192.168.121.2 router -...

No, that's not the case. The VPN reconnects, and evertyhing TCP based works correctly. On the other hand, the communication with SIP server is broken. If I manually force the reconnection, it does...