@Artur.Aragao Thank you for your post. You can try configuring mDNS to see if it resolves the issue. Please add all networks as both Service Network and Client Network. Here is the configuration...

@Rabauw Thank you for your post. Currently, the gateway’s LAN-to-LAN ACL does not support filtering by IP address or port. However, you may consider configuring Switch ACLs to meet these...

@JorgKr Thank you for your post. Once a VLAN ID is enabled, the traffic is tagged by default. Could you please let us know why you would like to tag the WAN?

@snippet Thank you for your post. Could you please share your current LAN configuration? Do you have any additional LANs besides the default one? Also, how did you test the inability to isolate...

@rpissm Thank you for your post. On our routers, One-to-One NAT only takes effect when the connection type of the corresponding WAN port is set to Static IP. Regarding the feature you mentioned, I...

@nlibby Thank you for your post. Policy routing for WireGuard VPN tunnels is not currently supported. You can restrict peers to specific subnets by configuring the Allowed IPs accordingly.I will...