@MDowns What you are seeing is expected behaviour, not a bug in the Omada controller. Disabling IPv6 in the controller only tells the Omada gateway (the router) not to hand out IPv6 prefixes or...

@chawco Thank you for your post. Is your GPON SFP module plugged directly into the ER8411?The ER8411’s 10 G SFP+ WAN port only supports negotiation at 10 G, so the link will not come up. The MC420L...

@Sc0th Thank you for your post. The current setup is as described. Regarding your requirement, I will forward it to the relevant department. Here is another viable approach: If you only need to...

@Philip81 • The C250 can upload motion-triggered snapshots or short clips to an FTP server, but it does not stream a continuous live feed to FTP and store it as playable video files. • Therefore, if...

@Adam123456789 Thank you for your post. Please confirm whether your camera supports addition via ONVIF and RTSP protocols. Additionally, verify that the NVR can ping the camera and ensure the...

@RobsGax Besides the three items above, gathering CLI output while the issue is reproducible is critical for our analysis—please provide it. When the problem occurs, access the device via SSH or...