@GRL I was thinking exactly of this issue as well! Here's what I tried: 1. First Scenario: Special Character in the Route Name First, I use the arrow in the name (by typing ->) but Mac shows a...

@GRL Here's what I found. This is the Static Route I set up with my final attempt. (The current working one) This is a routing table (after enabled those routes for 5 minutes after) Here's the...

@GRL Destination: 10.0.0.0/8 Next hop: 10.0.0.10 (switch) The route doesn't propagate to the routing table as well. I don't know why. It's so strange. I wait around 3-5 minutes. Constantly refresh...

@GRL Thanks for your kind reply. I have stumbled upon your post and tried that with my subnet 10.VLAN.0.X and it doesn't work as well. Yours brilliantly preserved DHCP preservation functionality on...

I think there's definitely something wrong with the static routes part on the gateway itself. I just don't know why that happens though. I tried spin up Proxmox (Trunk port, VLAN aware, got the...

Hi! I have problem on making InterVLAN routing communication between my gateway and my switch. Guide on how I do this: https://community.tp-link.com/en/business/forum/topic/650966...