@Kevin_Z I think that makes sense. It should be easy to reproduce. Thanks.

@Markus7 Update The 2.4GHz network is consistently performing very poorly. Today I disconnected the AX73 node in the solar house from the Easy Mesh and configured it as an access point (AP) with the...

@Kevin_Z Thanks for the feedback. 1. I updated the firmware on the two AX73 routers. The result was that the 2.4GHz network became even worse. 2. I then reconfigured the bandwidth of the 2.4GHz...

@Markus7 Update Four Smart WiFi switches went offline again in a short period of time. I checked with the Net Analyzer app and found that the 2.4GHz network keeps dropping out, despite a high signal...

@Kevin_Z My new configuration has been running for a while now: I replaced the AX10 with an AX73 because the AX10 doesn't support Ethernet backhaul. I've disabled Smart Connect again. Overall, it...

@Markus7 I did some more research and found out that Smart Connect might be the problem: Specifically with "2.4GHz only clients." Smart Connect tries to force them to use 5GHz, which then causes the...