@Joseph-TP Thank you for the quick reply and suggestion. This is quite challenging for the following reason. When I connect the ONT directly to my desktop PC, it negotiates a 10 Gbps link speed...

@Joseph-TP So, the speed obtained by the PC (with a network card) directly connecting to the ONT is even lower than the speed obtained by the PC connecting to the Archer BE800? Yes. Max 1.4 Gbits...

@Joseph-TP Q. Are the speed test results for when the PC is directly connected to the router? A. My desktop PC with a 10G LAN card is connected directly to the BE800 via Cat7 cable. Q. Have you...

@Joseph-TP Hi, I’ve installed the pre-release firmware on my Archer BE800 (1.4.1 Build 20260119 rel.30658(4555)), but I’m still seeing the same issue. Speed test over LAN never goes above 3.5 Gbps...

@Joseph-TP Hi, thanks for sharing the new pre-release firmware and the feature list. 🙂 I really hope this update will also fix the PPPoE throughput issue, so that with the BE800 router I can finally...

@Joseph-TP The BE800 router is connected using a Cat7 ethernet cable to a 10G ONT device that operates in bridge mode (Huawei OptiXstar HN8010Ts-20). The ONT device has a 10G lan port. On the BE800...