@urbciech, if you use the CPE in »Router« operation mode, it is not possible to assign the second network (LAN2 »behind« the CPE router) the same IP address 192.168.1.0 used in the primary network...

@AndrewW-link, yes, a mesh network uses a hidden SSID. But I see only one per device and if you have a second EAP225 it uses the same channel. Are you sure that the second record of a hidden SSID is...

SoHoAdmin wrote Thank you for your help this far - i will post back and let you know how I get on with the new gear when it arrives later next week You're welcome. I think with a JetStream switch you...

Lens wrote What I like about the Zyxel approach, it let you define which data to log on your syslogserver and which not. This sounds like a good idea for the data to be recorded. But what if a judge...

APRC-P3-Tel wrote I think 99% of the portal functionality is same between all countries and for the remaining fringe 1% requirement of divergence (such as this law enforcment support one), it may be...

Ced2ric wrote Hi house has 15m large and 10 m depth per floor. 2 floor and an atic. Each antenna's are using a separate channel on both the 2.4 and the 5ghz spectrum. In my opinion it's overkill to...