@Nav32, I recommend to set the CPE's IPs to unused IPs from your regular network. For example, if your network is 192.168.1.0, set first CPE in AP mode to static IP 192.168.1.254 and second one in...

@Fizz1234, could be firewall settings. Does your server have a route back to the host running Omada controller? Modern systems often require this to prevent spoofing. Check with netcat or wireshark...

@Ronald1965, thank you very much!

@Fizz1234, the standard port for syslog is UDP or TCP port 514, but not 1514. If you want to use another port, you have to configure the syslog daemon. In UNIX/Linux rsyslog it's done this way (for...

MarioT wrote I am wondering if there is any ways to do the same, but with IP adresses? No, it's not possible and it would make not much sense to block clients by IP address since traffic is not IP...

@Nav32, »not taking any data from ISP router« is far too vague information to be able to help. Please describe your network topology or – even better – post a network diagram with all settings of the...