tbonecopper wrote What's the trick to get them to work? If you already did configure the EAPs, you did place them into stand-alone mode. Use the discovery tool to connect them with the EAP controller...

If you use a static IP for your PC, make sure there is a default route to the gateway router (192.168.0.1) and a DNS server's IP set (most often the same IP of the router or use Google's DNS, which...

If you use a Unix-like server, see: http://help.papertrailapp.com/kb/configuration/configuring-remote-syslog-from-unixlinux-and-bsdos-x/ If you are using Windows, I don't know wether it can receive...

ruzzzz wrote Everywhere big label 300mb/s, real 75.That is at least incorrect, no user cares about "radio speed", that's fake. Any wireless device always negotiates WiFi speed with the clients...

ruzzzz wrote Adviced 300, ok, 250...200, but 75..? You certainly will not achieve 300 Mbit/s data speed since the CPE's Ethernet interface is capable of 100 Mbit/s only (that's the price for having...

michael.santos wrote How does the AC50 controls the CAP1750 AP? Wich Port on AC50 should the AP's connect? If I have 2 SSID's for 2 Networks (192.168.0.x and 192.68.1.x), wich IP addresses should the...