absentrecall wrote Others having the same config loss problem, please give this a try and report back. Yes, it's a bug in the firmware. The function " Save Config" works just one time after a...

cayvman wrote I have a linksys wrt1200ac router. So, if I'm understanding the directions correctly, I must first set up a VLAN on the router than attach the cpe210's poe to that (VLAN) port. Correct?...

ermal wrote Do you have any idea what would nbe a good configuration for ping watchdog? IP address = your main router Interval = default 300 seconds means ping is sent every 5 minutes. Delay =...

Try to find the most unused channel. Note that in n mode using OFDM modulation, the CPE will use 4 channels @20 MHz channel width, so be sure to set it to 4 channels apart of your neighbor's device...

Set the CPE210 to client mode and connect it wirelessly to the RE210 if this is already connected to your local WiFi network. Connect your CCTV cameras to the CPE210 - no router necessary. The CPE210...

Do your neighbors also use 4 watts TX power? :o Then that would pretty much explain casual drops back to 1 Mbps. :D