Pugs wrote Thanks bud, TP-LINK should be paying you for supporting here! Gladly! Would buy certain JetStream switches then to play with them. :-) Anyway another silly? question, where do you change...

Erik216, what about testing your network? Check the gateway and DNS settings your wireless clients get from the DHCP server. Do you get valid IPs for the gateway/DNS? If not, your DHCP server doesn't...

Hi Pugs, on EdgeRouter a virtual interface is an access port if you set only the PVID, but no other VLAN. It becomes a trunk port if you add more VLAN IDs. Thus, EAP Port config on router Now pvid 1...

@don_chuwish, you need to update your OC200 to version 1.7.0 for EAPs with new firmware 2.20.1. If you did configure your OC200 already, make sure to read the Omada Controller Upgrade Guide before...

Tony_C wrote After reding this article, I tried to pull the private network out of the default VLAN 1 and make it VLAN 10 and set the managemnet to VLAN 10. As soon as I did this, I lost complete...

@Kolobo4egggg, OC200 is the most easy solution, yes. You just connect the OC200 to your existing network/router. It will detect the EAPs and after adopting the EAPs you can manage them using the...