Hi, If your dhcp-server is in vlan 1, and clients are in vlan 10 then you need to configure DHCP VLAN Relay. If dhcp-server and clients are in the different sub-network, then you need to configure...

Andone wrote You don't need to care about the multi-nat of the router, I think you are use the TL-R480T+ V9, just choose the WAN port which used to access the internet. You can connect a PC to the...

verysneaky wrote Mitya: If it isn't a L2 issue, why would it have been resolved by power cycling my L2 switch? I wasn't experiencing problems pinging the router or accessing the internet, only other...

It is maximum for this model. For example, T2600G-28TS has much more of it, not sure about the maximum. If you have a lot of these switches and you really need lots of MAC VLAN entries, you can try...

Just for test. Try to configure manually wireless channel (for example, 6), make wireless bandwidth 20MHz, disable WPS. Do you really need Smart IP for LAN interface? I hate it. It must not affect,...

Do basic troubleshooting at least. Try to ping 8.8.8.8 from PC, try to ping router, try to resolve (nslookup yahoo.com), traceroute. You can start with it.