MikePLV2Online
Following: 0Followers: 1
Forums/ Smart Bulbs
Wednesday
Re:Any way to change WiFi without total reset????
Usually not. The HS's have an API for this but it's not exposed in Kasa. The standard way is to use your old SSID and password on your new router - most IoT devices will connect to the new router...
0KUDOS
Forums/ Smart Plugs
a week ago
Re:Re:Re:Re:Re:HS100 not switching off power
The clicking you hear is the solenoid attached to the contacts engaging/releasing. The contacts are spring loaded open, the solenoid pushes them closed. If they don't open when the solenoid releases...
0KUDOS
Forums/ Smart Plugs
a week ago
Re:Re:HS105 Smart Plug - not responding after adding second plug
It's almost certainly a problem with your network. Do you have a mesh or any access points? Any static or reserved IPs in the network or in the router setup?
0KUDOS
Forums/ Smart Switches
a week ago
Re:HS 200 switch flashing red
If they're flashing red (amber) they're unable to connect to your wifi. You shouldn't need to reset - does the restart button not work? Are you using APs? If so they may not be connecting where you...
0KUDOS
Forums/ Smart Switches
a week ago
Re:Smart Switch not working with fan/light combo
Most likely the wiring isn't correct or you have a loose connection. If the switch is rebooting (you'll see it's LED flashing after turning it on) it's almost certainly the wiring. It's possible but...
0KUDOS
Forums/ Smart Plugs
a week ago
Re:Re:Re:Re:HS100 not switching off power
If it clicks but the power doesn't shut off the relay contacts are sticking closed. You might try tapping it to see if it'll start working but that's usually only short term and you'll probably need...
0KUDOS
123...12