bambinotenchieLV1Online
Following: 0Followers: 0
Forums/ 3G/4G Routers/MiFi
2020-12-04 10:16:43
TP-Link Archer MR200 - No assigned public IP issue when using DiGi (Malaysia telco) 4G broadband
Hello TP-Link, Lately, I found out that some of our TP-Link Archer MR200 having problem when using DiGi 4G broadband services (DiGi is one of local telco service provider in Malaysia). My company...
0HELPFULS
Forums/ Wi-Fi Routers
2020-02-26 03:21:23
IPSEC VPN tunnel - Single IP for local and remote tunnel access
Hello there, On setting up IPSEC VPN section. I noticed there are option to set up tunnel access from local and remote access using single IP address instead using Subnet addresss. If both set to...
0HELPFULS
Forums/ Routers
2019-07-08 08:49:57
Re:Re:Re:Re:GRE/IPSEC tunnel on TP-Link VPN router
Hi, Thanks but I think I need to explain abit detail. What I meant with Tunnel with IP address is like as shown below (using Cisco as an example): ! interface Tunnel1009 description RemoteOffice No:...
0HELPFULS
Forums/ Routers
2019-07-08 08:35:58
Re:Re:GRE/IPSEC tunnel on TP-Link VPN router
Hi. Does it support tunnel with an IP address on both side. I knew some of TP-Link SMB router supports L2TP but not all. Thanks.
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2019-07-08 02:16:14
Re:Re:Re:Re:How to configure IPSEC LAN to LAN VPN tunnel with TP-Link Archer MR200 and Cisco router
Thank you Kevin ! Looking forward !
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2019-07-05 11:36:35
Re:Re:How to configure IPSEC LAN to LAN VPN tunnel with TP-Link Archer MR200 and Cisco router
Thank you Kevin. Will GRE/IPSEC VPN tunnel supported in the future ? I hope it has some advance VPN feature that similar to Cisco in the future firmware. Thanks
0HELPFULS