stawoLV2Online
Following: 0Followers: 0
Forums/ Tapo Smart Cameras
2020-07-17 06:44:14
NC450 1.5.5 firmware
Recently, I noticed a post in this forum where was the discussion about 1.5.5 firmware for the NC450 camera. I have NC450 in Polish ditribution and my camera have only 1.5.2 firmware. On Polish...
0HELPFULS
Forums/ Tapo Smart Cameras
2020-05-25 05:26:49
Re:NC450 Unable to load motion clip
@HelpPlease I suggest you read this topic: https://community.tp-link.com/en/home/forum/topic/156845
0HELPFULS
Forums/ Tapo Smart Cameras
2020-04-23 08:56:17
Re:NC450 1.4 firmware
@constant when I upgrade my NC450 firmware to 1.5.2 and turn OFF the 24-hour recording option my camera work fine i.e. it is correctly detects movement, correctly makes a recording after motion...
0HELPFULS
Forums/ Tapo Smart Cameras
2020-02-10 13:37:46
Re:NC450 - recording problem
I almost forgot :) To be sure that the camera will work properly, I suggest you to restore the factory settings on your camera after turning off the 24 houre recordnig option.
0HELPFULS
Forums/ Tapo Smart Cameras
2020-02-10 13:27:54
Re:NC450 - recording problem
@Anukalp_Dwivedi when I upgrade my NC450 firmware to 1.5.2 and turn OFF the 24-hour recording option my camera work fine i.e. it is correctly detects movement, correctly makes a recording after...
0HELPFULS
Forums/ Tapo Smart Cameras
2019-10-02 10:20:10
Re:New Firmware Update problem 1.5.1 in NC450 v.2.0
I'm still testing 1.5.2 firmware on 3.1.14 app ver. but so far so good
0HELPFULS
123...