Hi MonzaBlue, As you know, the LAN4/WAN port is the gigabit port, while the other 3 are all 100Mbps ones. The LAN4/WAN port can work when it works in bridge mode, which means the VR400 is used to...

Hi, You can install this realtek driver to give it a go. Meanwhile, cause the current channel width of 2.4GHz is 20Mhz, is there any other wireless networks can be used to do a comparison analysis?...

Hi Chris, The Deco P7 does not support host name resolution that is why you cannot connect to the peers by its name. Per you said, we can connect to the device via its IP address. Good day.

Hi Boriy, You are welcome, glad to hear that the Deco works fine now. If need any further help in the future, do not hesitate to contact us. Have a nice day.

Hi, The Deco can connect to each other by wired cable or wireless both, while the main Deco need connect to the modem/internet source by wired cable to get internet first. So back to your case, if...

Hi Caludio T and others who may concern, You can email our tech support to get the 1.3.0 firmware to give it a shot. https://www.tp-link.com/support/contact-technical-support/#E-mail-Support Please...