mariem56LV2Online
Following: 4Followers: 0
Forums/ Switches
2021-05-29 05:36:21
Re:Mode trunk
@glecomte I have a 7pcs TP-Link 2600G-52TS firmware:v4 And a pfSense with LAN interface IP addr network: 10.10.6.x with VLAN30 IP addr network: 192.168.30.x VLAN 40 IP addr network: 192.168.40.x And...
0HELPFULS
Forums/ Switches
2021-05-29 00:39:08
Re:Re:Re:Mode trunk
@Luchito TP has a way of complicating things haha
0HELPFULS
Forums/ Switches
2021-05-29 00:24:55
Re:VLAN1000 on a routed port?
@mariem56 I'm wondering if I could just setup my pfSense to have a VLAN 100 with network 10.10.10.0 /24 and setup VLAN 100 with network 10.10.10.0/24 in a TP link switch to avoid this problem.
0HELPFULS
Forums/ Switches
2021-05-29 00:23:43
VLAN1000 on a routed port?
Interface gi 1/0/1 IP addr = 10.10.6.195 /24 VLAN 1 = 172.16.5.13 /24 VLAN 30 = 192.168.30.5 /24 I've set up my interface gi 1/0/1 as a routed port but I noticed that there's a VLAN ID of 1000 for...
0HELPFULS
Forums/ Switches
2021-05-19 06:49:29
Re:Error to reset TP-Link 2600G-52TS
@mariem56 This thread was resolved. We just tried a lower BAUD,
0HELPFULS
Forums/ Switches
2021-02-04 04:15:15
Re:Error to reset TP-Link 2600G-52TS
@Fae Hi, I still can't reset my switch using different cords... Is there any other way to manually reset my swich?
0HELPFULS
123...