I reset my system a while ago (factory set all 3 units) and forced the daisy chain as follows: 1. Started Main, got it online, assigned, OK. 2. In the same room, I started and connected the 2nd, then...

@c.h.moller The issue I had was that the devices would not roam properly from one hub to the next. Instead, they would stay with the same hub but switch frequencies even though slower or weaker than...

So here's an idea I got from one of the Tech guys... If you have devices that CAN connect to 5ghz instead of 2.4ghz (such as iPhones, MacBooks, modern Windows computers) AND more importantly, devices...

@Nohit Right... so the daisy chain is something I intentionally forced. Not sure if it's a "blessed" solution, but the 3rd unit was too far away from Main to work. I did this by: Set up the Main unit...

@Jack2222 First, is this a legit solution? I would think that the Main NEEDS to be connected to the Modem... no? Secondly, Why would be making a different (middle) unit the Main solve the problem of...

Same and same again. I have nearly the same setup, my modem (Xfinity model they call B7 with 4 Ethernet ports), which is connected to the Master M5 unit, all in my office over the garage. Then one...