@R1D2 SOLVED!! I was so focused on the networking behind the CPE510 that I completely forgot about WDS. The WDS setting was set to auto, once I disabled this, everything worked as normal and I was...

@R1D2 I have adjusted my settings and am now receiving a snr of 85dB but the same problem still persists. From my LAN I can ping up to the TP-Link but nothing that's connected to it. Same going out,...

@R1D2 See screen shots below Setting the CPE to the same network as my root AP Root AP WC Settings Laptop received IP information from AP w/ TP-Link Cannot reach the internet Additional...

@R1D2 The management LAN the root AP is assigned to is 10.10.20.x, I have inter-vlan routing configured so my management LAN can communicate w/ all other networks. Yes, I have DHCP relay configured....

@R1D2 Take a look at my configurations below, I have double checked my DHCP pool and all is working as it should. When I connect my laptop to the same AP and SSID I receive an IP just fine but when...

@R1D2 The purpose of the CPE is to provide network connectivity to some devices that do not have Wifi capabilities. The CPE is connected to a switch which then connects to some of the end devices. In...