Quite the contrary. Changning tha MAX TX RATE to MCS14, from MCS15 made the problems go away. It has now been stable to over 2 months. This would not have been the case if it was another network...

@R1D2 It has been stable for several days, but today it acted up again. When it happens, the CPE210 closest to me stops responding to pings as well. This clearly indicates something else is...

@R1D2 OK. Thanks. I simply did not understand how it was supposed to work. I thought that changing the settings on the "master" (AP) would propagate to the Client. I have changed that now. I also...

Just wanted to check that I understand this correctly? This is a point-to point where one CPE210 is Ap and the other is client. In the graph below, my understanding is that LAN0 is my local LAN and...

@R1D2 "You can never predict which actual throughput you will get, since you never know who is sending data around your place on the same (or an overlapping) channel. " Absolutely! I will test some...

@R1D2 OK. Thanks. This gives me something to compare with. I did try having a go at the antenna alignment, but found it rather unresponsive. I could turn the antenna almost 90 degrees before I saw a...