BaenzLV2Online
Following: 0Followers: 6
Forums/ 3G/4G Routers/MiFi
2020-12-07 09:23:13
Re:Archer MR600 Antenna
@JSB RG-58 is really not suitable for 4G over 10m length, particularly on the higher frequencies. You get up to 10 dB attenuation on 1.8 GHz (90% of the signal power is lost in the cable).
1HELPFULS
Forums/ 3G/4G Routers/MiFi
2020-11-21 12:34:35
Re:Archer Mr600 Firmware Center.
I think the MR600 has reached end of life, it doesn't get firmware support anymore.
1HELPFULS
Forums/ 3G/4G Routers/MiFi
2020-10-28 13:12:09
Re:Archer MR600 V2 LTE Manual Band Selection?
@Sunshine So MR600v1 is end of life? I see no more firmware support since half a year
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2020-10-26 09:17:59
Re:New Archer MR600 BSNL 3G No Signal Problem
@dravid Have you also tried the official firmware? Maybe you have "4G only" selected?
0HELPFULS
Forums/ 3G/4G Routers/MiFi
2020-10-15 09:02:47
Re:What are the additional provided in updated hardware Archer MR600 v2 ?
Sunshine wrote Comparing with V1, V2 would support the manual band selection on the initial firmware. @Sunshine So the difference between v1 and v2 is only software? When can v1 have v2 software?
2HELPFULS
Forums/ 3G/4G Routers/MiFi
2020-10-14 09:47:29
Re:Two MIMO Antenna - Question
@darant No, this adapter won't do anything good but cause an impedance mismatch and additional attenuation on certain frequencies. Those adaptors shouldn't be used for RF.
0HELPFULS
1234...