Hello ! There's a new firmware but it stills lacks some 5 Ghz channels. Please provide a full working firmware with all channels (ex channel 100 DFS). The hardware is compatible because OpenWrt...

I had a similar problem. Auto mode seems to be "one time" config, it doesn't update if the network changes. I had put a random manual config (with validating the config not only change the combo)...

Hello ! I use a TL-WR902AC to connect an ethernet only NVR to Wifi. But the problem is TL-WR902AC V3 is not compatible with 5 Ghz DFS. Is there new router to replace it with 5 Ghz DFS or unofficial...

@Solla-topee That's the problem VIGI and Tapo are in two echosystems but VIGI must be 100% compatible because there's no Tapo NVR.

Hello ! Despite there are both TP-Link products Tapo C320WS and Vigi NVR1008H compatibility is bad ! Only standard detection is detected by the NVR and zones must be configured in the Tapo App not in...

Hello ! Despite it's a TP-Link product the NVR has bad compatibility with TP-Link cameras like Tapo C320WS ! Only standard detection is working and zones must be configured in the Tapo App not in the...