@Solla-topee is smart connect the same as 'band steering' in other vendors? So will that mean that all Onemesh devices will use smartconnect if i set this on the MR600 router? Thanks Paul

I've been using an MR600 with two RE305 Adapters and seem to get the best performance when using the following manual configuration rather than enabling smartconnect on the MR600. Set 2.4Ghz channel...

@ansellp typo on my post. replace openmesh with onemesh.

I'm looking to purchase another tplink openmesh compatible extender (i currently use the RE305 model with openmesh enabled). But i can't see any differences in the specifications between the RE305...

@ansellp i did eventually find the answer at the bottom of the OneMesh page. Hopefully anyone searching for the same answer will find this post. Q2: How to set up a mesh network when there are more...

I have a MR600 wifi Router and would like to expand the wifi network with some OneMesh Compatible extenders (RE305 Model), my question is can these be chained together to extend the signal. e.g....