SwissropeLV1Online
Following: 0Followers: 0
Forums/ WiFi
2020-04-03 06:41:54
Re:Mesh network switching Uplink without data loss
@R1D2 R1D2 wrote The Moxa device uses DFS channels. What if high-priority users (commercial live broadcasting, satellite links, weather radars, military radars) force your AP to change channels and...
0HELPFULS
Forums/ WiFi
2020-04-02 07:07:17
Re:Mesh network switching Uplink without data loss
btw, thank you for the LOOP21 Hint, i'll give them a call, maybe it is a suitable solution, we'll see....
0HELPFULS
Forums/ WiFi
2020-04-02 07:01:19
Re:Mesh network switching Uplink without data loss
Thank you for your great support guys We did use PILZ devices in one cablecar ended up repalcing them because of missing reliability, so we won't use them ever again. is it possible to connect two...
0HELPFULS
Forums/ WiFi
2020-04-01 11:06:05
Re:Mesh network switching Uplink without data loss
@R1D2 to have a redundant network, we need then a device that splitts up the data from one RJ45 to two and on the other end one that decides wich packet to take and wich to block to prevent loopback...
0HELPFULS
Forums/ WiFi
2020-03-31 07:09:06
Re:Mesh network switching Uplink without data loss
@JSchnee21 Thank you for your reply... the length of the cablecar is about 100 meters (300ft) with just one gondola, but it goes over a pylon (the slope changes from 30° to 70°) so i cannot just use...
0HELPFULS
Forums/ WiFi
2020-03-30 15:30:45
Mesh network switching Uplink without data loss
Hello Everybody As manufacturer of cable cars and the automation we often use wifi to get network access in the (moving) gondola now we have the first cable car with no sight connection from one...
0HELPFULS