robi217LV1Online
Following: 0Followers: 0
Forums/ Wi-Fi Routers
2020-05-09 14:09:59
Re:2.4ghz channel problem since updating to 1.3.0 firmware on Archer C6
Well I don't really know why it does not work, I had the same when I tried TFTP flashing from 1.3.0 to 1.2.1 directly, but when I used OpenWRT to get back to 1.2.1, it worked in one try without any...
0HELPFULS
Forums/ Wi-Fi Routers
2020-05-09 13:48:13
Re:2.4ghz channel problem since updating to 1.3.0 firmware on Archer C6
What do you exactly mean by "ignoring"? Is it the TFTP flashing that does not start? Or is it that the TFTP flashing gets finished, but after that, the router just simply reboots with OpenWRT like...
0HELPFULS
Forums/ Wi-Fi Routers
2020-05-09 13:25:14
Re:2.4ghz channel problem since updating to 1.3.0 firmware on Archer C6
Flashing back the stock image won't work through OpenWRT web interface, I'm pretty sure in that. Did you rename the file of the original firmware to ArcherC6v2_tp_recovery.bin? If you did, then turn...
0HELPFULS
Forums/ Wi-Fi Routers
2020-05-09 10:45:43
Re:2.4ghz channel problem since updating to 1.3.0 firmware on Archer C6
@spies Yes, I have EU version. I downloaded the firmware from the official TP-link website. The 1.2.1 is the one with the name "Archer C6(EU)_V2_200110", with release date of 2020-01-23. But I could...
1HELPFULS
Forums/ Wi-Fi Routers
2020-05-09 08:43:17
Re:How to set up One Mesh on Archer C6 new Firmware
@ArcherC6 As far as I know, OneMesh only works between a OneMesh Router + OneMesh repeater, but not between two OneMesh routers. You can read about it there (Q10):...
1HELPFULS
Forums/ Wi-Fi Routers
2020-05-09 08:15:32
Re:2.4ghz channel problem since updating to 1.3.0 firmware on Archer C6
@Fane I think that a secondary WiFi network is needed for OneMesh functionality, so if your router already has a FW with OneMesh feature, it is very likely. Anyway, you can use WiFi Analyzer on an...
0HELPFULS
12